AustraliaListed, local and safe classifieds market in Australia.
States
For Sale
Real Estate
Jobs

Futaba 6XH-FM 36Mhz Mode 1 Complete R/C Radio Combo with Servos in BAMBOO CREEK, Queensland for sale

Futaba 6XH-FM 36Mhz Mode 1 Complete R/C Radio Combo
Futaba 6XH-FM 36Mhz Mode 1 Complete R/C Radio Combo
Futaba 6XH-FM 36Mhz Mode 1 Complete R/C Radio Combo
Futaba 6XH-FM 36Mhz Mode 1 Complete R/C Radio Combo

Despite the look of the box, this complete Futaba R/C radio combination system has "NEVER BEEN USED!!". The item was purchased by my client, but put away in a cupboard and never installed in any aircraft or helicopter, my client has since upgraded to the new 2.4Ghz radio format.
The kit comes complete with everything seen here in the photos, and the unit does in fact work (recently charged up and turned on and tested).
The frequency for this radio is: 36.390Mhz
NOTE: THESE PHOTOS ARE OF THE ACTUAL RADIO AND COMPONENTS!!
THIS IS STRICTLY PICK UP ONLY PLEASE, BUYER WILL HAVE TO ARRANGE OPTIONAL POSTAGE IF REQUIRED!!
FEATURES:
128-segment LCD display provides better resolution that's easier to read
PPM/PCM feature allows modelers to use either FM or PCM Futaba receivers*
Other popular functions include: mixing, dual rates, electronic trims with computer memory, ATV and servo reversing
Available in 36MHz
INCLUDES:
6XH 6-Channel Transmitter
R116FB Receiver
Five S148 Servo
Servo mounting
SPECS:
Transmitter:
6XH 6-Channel Transmitter
Operating system: 2-stick, 6 channels, PCM1024 system
Modulation: FM/PPM or PCM, switchable
Power requirement: 9.6V Nicd battery(NT-8iB)
Current drain: 250mA
Receiver:
Receiver FP-R116FB
Receiving frequency: 36MHz band
Intermediate frequency: 455kHz
Power requirement: 4.8V or 6V Nicd battery (shared with servos)
Current drain: 22mA
Size: 33.4X50.4X20.5mm
Weight: 30g/1.06oz
Receiving frequency: 36MHz band
Intermediate frequency: 455kHz
Power supply voltage: 4.8V shared with receiver
Current drain:
Motor: 100mA, Amplifier: 20mA (at 4.8V)
Size:
Control amplifier: 1.06 x 1.89 x .63 in. (27 x 48 x 16mm)
Weight: 3.6 oz. (102g)
Servo:
Control system: Pulse width control, 1.52ms neutral
Operating angle: One side 45 degree min. (including trim)
Power requirement: 4.8V or 6V (from receiver)
Torque: 33.3 oz-in (2.4 kg/cm) @ 4.8V / 42 oz-in (3.0 kg/cm) @ 6V
Transit Time: 0.28 sec/60?@ 4.8V / 0.22 sec/60?@ 6V
Current drain: 8mA (at idle)
Size:1.6 x 0.8 x 1.4" (40 x 20 x 36mm)
Weight:1.6oz (44g)